discussion Anti-Social & Lurker - Hideout spot

[User_158771]

You must be registered to see attachments

You must be registered to see attachments

"Hello doryan69 and welcome to the thread.
Take a moment to read through the very first post of it, then take a stroll through the university.
Both places have some good to know info.
The Coin-Hustlers University"

Gotta admit I chuckled at the gifs. Now I'm feelin` a bit self conscious, in that I actually do wanna say thank you but don't wanna seem like I'm lolicoin farming. So I'll give a shot at uploading a gif (these weren't a thing back in ma day. So as an answer to your welcome which I appreciate, and thanks for the link, but I'm equally excited and have this feeling:

 

[Hexborn_Magus]

Now that the KQotD is shared, time for my video share. Double feature this week:

Spoiler: Yuri

You must be registered to see attachments

You must be registered to see attachments

Spoiler: Yaoi

 

[Tleilax]

Goo' morning everyone, as you all know, @KaityCat is away again, and like last time has entrusted me with the

Spoiler: Kitty Question of the Day!

what's the first thing you do in the morning?

My answer: Pee.

Okay, more accurately, boot up the PC, pee while it's turning on, fix myself a drink, then check how many backreading pages there are to sift through on here.

I usually start my work days by saying, "I don't wanna." Followed by going to the bathroom and then getting ready to head to the office or start coffee if I'm working from home. Weekends is eventually rolling out of bed too early because I'm now wired to wake up by certain times, then bathroom, then coffee.

 

[Slumdum]

Me? Crazy? I would never!

You must be registered to see attachments

Late good morning to you Liz, hope you enjoy your day.
And that you new mattress is everything you dreamed about.

hope you all have or have had a great day. i came in ready to too work on my goal of 7500 coins and immediately i

the fist day i saw it as 7500 for + not 750

BUT I AM STILL CELLEBRADING

for that only means i am so much closer too the goal so

Good morning to you shadow558!
750 coins can go pretty fast, but if you saw it as 7500 first, daaaamn.

Goo' morning everyone, as you all know, @KaityCat is away again, and like last time has entrusted me with the

Spoiler: Kitty Question of the Day!

what's the first thing you do in the morning?

My answer: Pee.

Okay, more accurately, boot up the PC, pee while it's turning on, fix myself a drink, then check how many backreading pages there are to sift through on here.

Goo morning to you goo master!

Slum answer of the day.
The first thing? Get out of bed...

You must be registered to see attachments

But like Hexborn, I gotta say, the first thing is probably go pee.

Gotta admit I chuckled at the gifs. Now I'm feelin` a bit self conscious, in that I actually do wanna say thank you but don't wanna seem like I'm lolicoin farming. So I'll give a shot at uploading a gif (these weren't a thing back in ma day. So as an answer to your welcome which I appreciate, and thanks for the link, but I'm equally excited and have this feeling:

As long as you follow the rules, there will be no problem.
And I'm glad, I made you chuckle.

 

[shadow558]

Good night shadow.


If you think members+ costs 7500, you might want to check the shop again.

You must be registered to see attachments

i did and i conclude 2 things i am

and

ty for the surprise though

 

[LizBell]

Goo' morning everyone, as you all know, @KaityCat is away again, and like last time has entrusted me with the

Spoiler: Kitty Question of the Day!

undefined

Either debate with myself if it's worth it to get up from bed (in the end I always give up and end up getting up), or get the phone and start doing the daily log in with my gacha games

 

[shadow558]

You must be registered to see attachments

i know good thing i dont have a teacher anymore she would be like

 

[Vizer007]

Goo' morning everyone, as you all know, @KaityCat is away again, and like last time has entrusted me with the

Spoiler: Kitty Question of the Day!

what's the first thing you do in the morning?

My answer: Pee.

Okay, more accurately, boot up the PC, pee while it's turning on, fix myself a drink, then check how many backreading pages there are to sift through on here.

Good morning)
What do I do? Checking the phone for what time is it xD
And depending on the answer, I either start reading something or continue sleeping)

You must be registered to see attachments

 

[User_43891]

Good morning everyone! Happy Friday.

You must be registered to see attachments

Goo' morning everyone, as you all know, @KaityCat is away again, and like last time has entrusted me with the

Spoiler: Kitty Question of the Day!

what's the first thing you do in the morning?

My answer: Pee.

Okay, more accurately, boot up the PC, pee while it's turning on, fix myself a drink, then check how many backreading pages there are to sift through on here.

Step one is make sure everyone is up and getting ready. Step two is take the dog out. Step three is get myself to the bathroom. Just Dad things.

 

[shadow558]

Late good morning to you Liz, hope you enjoy your day.
And that you new mattress is everything you dreamed about.

Good morning to you shadow558!
750 coins can go pretty fast, but if you saw it as 7500 first, daaaamn.

Goo morning to you goo master!

Slum answer of the day.
The first thing? Get out of bed...

You must be registered to see attachments

But like Hexborn, I gotta say, the first thing is probably go pee.

As long as you follow the rules, there will be no problem.
And I'm glad, I made you chuckle.

You must be registered to see attachments

hehe morning hope you day goes better then mine

from now on i check evrything twice thats for shure i am just glad you guys told me before i made that goal and found out myself

anyway how do you reply to more then one in one go that would have been much easyer in a day like today where i had a few more to reply then i exspected

Goo' morning everyone, as you all know, @KaityCat is away again, and like last time has entrusted me with the

Spoiler: Kitty Question of the Day!

what's the first thing you do in the morning?

My answer: Pee.

Okay, more accurately, boot up the PC, pee while it's turning on, fix myself a drink, then check how many backreading pages there are to sift through on here.

in the morning i go to bed

when my alarm rings i hit snooze and sleep 2 more hours

 

[bijuu]

Good morning)
What do I do? Checking the phone for what time is it xD
And depending on the answer, I either start reading something or continue sleeping)

You must be registered to see attachments

This 1000%. How else will I know if there's enough time to go back to sleep for a few more minutes/hours? xD

 

[Aszorath]

This is so cool!
And where do you find the models? Is it difficult to learn? Is it very expensive?

all very good questions with a range of answers.

There are a few free and paid sites like thingiverse, printables, cults3d, thangs, stlfinder, and myminifactory. There are some museums that also have models of ancient statues, buildings, and other things from history. I do have a few pirate sites I use and even sometimes just pay for it if the price is ok. A lot of copyright 3D artists are on patreon. The pirate site can range from free to a dollar or two, even right up to where the original artist charges, so you want to be careful with the pirated paid ones.

now the tricky part to answer is about how hard it is to do. it really depend on the person skill level with stuff. can you work on cars, or build a computer or does learning software scare you? some people can get a machine and it can be a pain others it works like a dream. now days the price for a good cheap printer can be in the couple a hundred dollar range, such as bambu labs FDM printer can almost just plug it in and go. no bed leveling, Z-axis adjustment, speed twerks. there is still some basic stuff to learn like what kind of filament you want to use but that's not to hard to choose from. FDM is the easiest to get into and the cheapest, with the lowest level to learn prep and clean up after, and it is the best from say part printing like door handles or bottle cap removes for people that have a hard time. the PLA filament is fairly tough. in the beginning it can feel a little weird learning a few things but really its not that hard to do. there are tons of youtube vidoes that walk you thought everything, it can just seem like a lot when you see all the settings but you really only use a few. almost each day the goes by its getting easier and cheaper to get into.

Now the real pain is resin printing, this one is a little more tricky, and the learning curve is there. I would not recommend a resin printer for someone that is just playing around or even as a hobby. unless you love tinkering and playing with stuff. You would think the software would be the same, but it's not. There are only a couple of companies that do it, and yes, they have free versions, but there is stuff you have to learn about the 3D model itself, the angle you put it on the plate, hollowing it, making sure there is little or no suction when the model lifts off the plate, supporting the model, and even the temperature can affect your print. It doesn't end there since you have resin cleanup and model cleanup. You can do this cheaply with just an alcohol bucket and a toothbrush or buy an ultrasonic cleaner (a low-temp one since it is alcohol), again you can just cure the model by leaving it in the sun but it is highly recommended to use a special UV setup to cure the model. but wait there is more if you dont cure it right and the model wasn't properly cured and hallowed and drained some time down the road it could crack open and leak. resin printer are 100% for highly detailed stuff, it can even do like skin texture and it can kind of printer faster then a FDM since it prints each layer at the same time it can print say 10 chess pieces at the same time, the FDM would take 10 times as long but the FDM will be stronger.

so in closing you can get a FDM get the bambu for 600, I got a anycubic vyper for about 400. 1 kilo of filiment is about $17, a lot of first time buyers will get an ender they are only 200 but you will have to learn a lot more since you will have to make adjustment and play around with things to get it working perfect, instead of the bambu and other more premium companies that come more calibrated. on the software is free at least the opensource ones. not 100% sure is bambu locked their printer behind a paywall or not.

well that was a lot more then I planned on writing but hey its done. if you have anymore question just ask. I'm not an expert on this and still learning stuff about it but I will be more then willing to help.

 

[Slumdum]

hehe morning hope you day goes better then mine

from now on i check evrything twice thats for shure i am just glad you guys told me before i made that goal and found out myself

anyway how do you reply to more then one in one go that would have been much easyer in a day like today where i had a few more to reply then i exspected

Take a look at this little guide, might be able to help you out. (You can click the yellow name, to go directly to a post.)

Let me try and help you out then.

You must be registered to see attachments

If you press "Reply", the post you're replying to will be inserted into the message box.

But if you press the "Quote" button, it will be stored, and you will be able to find it here.

You must be registered to see attachments

"Insert Quotes", when pressed this will popup.

You can rearrenge if you have multiple, by dragging the "button" with three lines.
When done, just press "Quote Messages" and they will be in the message box, ready for you to reply to!

Now, the next step is the "edit" button...


But Slum, nobody asked for you help...
Nope but had nothing better to do anyways.

 

[conzibald]

You must be registered to see attachments

 

[Slumdum]

You must be registered to see attachments

You must be registered to see attachments

 

[Vidilo]

Did you know there are degrees of douchiness?
From least to most:
douche
douchebag
douchenozzle
douchecanoe
doucherocket

In German there is apparently "Duschlampe", which is translated "shower-lamp" but also "Du Schlampe" - "you bitch!" ;-)

 

[shadow558]

Take a look at this little guide, might be able to help you out. (You can click the yellow name, to go directly to a post.)

great

that will make it so much easyer btw is there a place in here to go to figure out how it all works or should i just keep asking around for i have never been in a comunity before i never relly talked or beeing social on the internet the day i joined this site was the werry first time i posted a gif in my life i read the rueles so i wont screw up but yhere thats about it

 

[User_158771]

You must be registered to see attachments

Now that's a great wake-up alarm.

 

[Slumdum]

great

that will make it so much easyer btw is there a place in here to go to figure out how it all works or should i just keep asking around for i have never been in a comunity before i never relly talked or beeing social on the internet the day i joined this site was the werry first time i posted a gif in my life i read the rueles so i wont screw up but yhere thats about it

You can just ask your questions here, if you wanna, and if people know it, they'll hopefully answer.
And don't worry, a lot of us started out like that.

 

[Vizer007]

I just wish I had the required system to play it...

You must be registered to see attachments